Hex Water Swivel Adaptor
Water swivel for diamond core drill bits. The Hex shank allows for the water swivel to be used on a standard 13mm chuck drill.
Now also comes with SDS Plus fitting and SDS Max fitting so you can use on 3 different types of drills. Easily and quickly interchangeable - simply screws on / off.
Water is then connected to allow water to travel down the inside of the core barrel to ensure correct drilling procedure.
The water swivel has 1 1/4" UNC male thread & 1/2" BSP female to accommodate most types of core drill bit threads.
Can only be used in drill mode. Not hammer mode.
|22 × 15 × 10 cm