Maximum Drilling Diameter hand held is 80mm. When used with a stand maximum drilling diameter is 150mm.
The machine’s front handle can be turned 360 degrees, which is useful when drilling in cramped areas.
OUT OF STOCK - NONE AVAILABLE IN AUSTRALIA. WILL UPDATE WHEN WE KNOW ETA.
A LED indicator on the DM220 shows when the machine is in preferred vertical, horizontal or angled position.
This provides more efficient drilling.
When making a starter hole or cutting through reinforcement speed can be reduced by half using SmartStart.
The handle has an integrated water hose, which together with the electric cable run parallel conveniently from the machine.
The Elgard™ feature available on several of our drill motors means that if the motor runs at too high a load for a long period, it will start to pulsate.
If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ significantly increases the machine’s service life.
Voltage 230 / 110V
Amperage 8 /13A
OutputRPMat full load 580 / 1400 / 2900 rpm
Spindle speed full load 580/1400/2900 rpm
Rated output,W 1850/0W
Rated current,A 8/13A
Max drill bit diameter, handheld 80mm
Max drill bit diameter, stand 150mm
Spindle thread, outer 11/ 4"
Spindle thread, inner 1 / 2"
Weight 7,5 kg
Sound pressure 90 dB(A)
Sound level 94 dB(A)
Power rating 1100W
Comes with case & manuals.
12 month Australia wide warranty.
Item sent out within 2 working days.
|Dimensions||65 × 52 × 16 cm|